Quick Summary:

• Best TV mount height: Center of screen at seated eye level (usually ~42″ from floor).
• Viewing distance: Sit 1.5–2.5× screen size away (e.g., 65” TV = 8–12 ft).
• Avoid fireplace mounts: Too high, neck strain, and heat risk.
• Check room layout: Align TV with main seating, not necessarily wall center.
• Studs are critical: Use a stud finder and verify twice before mounting.
• Tools needed: Drill, tape, pencil, level, screwdriver.
• Mount types: Match VESA pattern and stay within weight limits.
• For renters: Use no-drill mounts, anchors, or tension poles.
• Hide wires: In-wall kits, raceways, or furniture tricks; never hide bare power cables.
• Hire a pro: Recommended for large TVs or tricky setups (e.g., above fireplace).

Hanging a TV seems simple—until you realize you drilled too high or low. If your screen sits in the wrong spot, it strains necks and ruins the view. I help business owners and facility managers avoid that rookie move. In this guide, I’ll show you how to pick the best height, avoid glare, and mount it clean—just like the pros at DCMM do in commercial spaces every day.

How do you figure out where your TV should go on the wall?

The best height to mount your TV is where your eyes land when you sit. That line should hit the center of the screen.

What is the correct height to hang a TV?
Answer: The middle of your screen should be at eye level while seated.

Measure from the floor to your eyes while sitting. That’s your center height. For most folks, that’s 42 inches off the floor. Mount the screen so its center hits that spot.

Now stand back. Is there a window nearby? If yes, check for glare. Light bouncing off the screen will ruin the best seat.

How far should you sit from the TV?
Answer: About 1.5 to 2.5 times the screen’s size in inches.

A 65” TV should sit 8 to 12 feet away. Too close and your eyes hurt. Too far and you miss stuff. Use that math to place your couch.

Room shape matters too. Don’t just center it on the wall. Center it with your main seating spot.

Avoid placing the TV above a fireplace. It’s often too high, hurts your neck, and heat can damage the screen.

If you aren’t sure, you can use online tools to mock this up. Or, if you want help, I can measure your space and give advice that fits your room just right.

What do you need before you even lift the TV box?

You need to check the wall studs first.

How do you find wall studs for TV mounting?
You use a stud finder and slide it along the wall. Be sure it beeps or lights up before you mark. I suggest checking each location two times to confirm. Studs hold the TV and keep it on the wall. Never skip this step.

Next, grab the right tools. You’ll need a drill, tape, pencil, level, and screwdriver.

What mount do you need for your TV?
Find the VESA size on the TV box or look online. Match the holes on the back to the mount. Each mount has a weight limit. Always stay below that. Tilting, swivel, or fixed—you pick what fits your room and use.

Full-motion mounts are great for big rooms. Tilt mounts cut glare from lights. Fixed keeps it flush and clean.

How can you mount your TV without making your walls cry?

To hang a TV in an apartment, use anchors that do not harm walls or paint.

You must know your wall type. Drywall needs studs or special anchors. Brick and concrete walls need masonry bits and sleeve anchors. For renters, mounts like no-drill stands or tension poles work great. I like toggle bolts or snap toggles for drywall where studs are not in range.

If kids live in your home, use anti-tip straps and lower the mount point. Test your mount by pushing on it hard; you want no give. Avoid overdrilling holes. Keep your setup light but firm. Use safer tools, not pressure.

How do you make the TV float like magic—with no cables in sight?

To mount a TV with no wires showing, you have three good ways: in-wall cable kits, wire raceways, or smart use of shelves and furniture.

The cleanest look comes from in-wall cable kits. These let you fish wires from behind the TV down to an outlet. Always use a rated power bridge kit for this. Never hide power cables inside a wall without one.

Wire raceways work well if you rent or don’t want to cut the wall. They snap over wires and can match your paint.

If your TV hangs above a stand or console, tuck HDMI or coaxial wires behind it. Add shelves below for a clean, built-in look.

Soundbars also help hide wires. Some mounts even let you attach one to the TV, which keeps things tight.

Use fewer cables by streaming with one box like Apple TV or Roku. This keeps wall clutter down.

Wires may be simple, but hiding them right keeps it all looking pro.

What if you don’t want to mess it up—or mess with it at all?

Mounting a 65-inch TV by yourself? Not smart—get help or hire a pro. Large TVs need two people, strong arms, and the right tools. Most costly DIY fails come from bent mounts, missed studs, or split drywall. A pro has laser levels, stud finders, and wiring tools. We check VESA fit, wall type, and weight limits. Over a fireplace? Wrong height ruins your neck and risks heat damage. DCMM techs handle that with fan kits and custom installs. Time and risk saved may beat the cost to wall mount a TV professionally, big time.

Conclusion

Getting your TV in the right place takes thought, tools, and the right steps. You learned how to set height for comfort, find studs, and fix cables right. You now know why wall type, room light, and layout all matter. Mounting a TV can be fun—but also easy to mess up. If you want clean walls, no stress, and pro results, call us at DCMM. We make it safe, sleek, and done right the first time.

DCMM LC |  Powered by Astrowave © 2025. All Rights Reserved.